MAMBA DRAINAGE SERVICES
Backflow Prevention Vancouver
Annual backflow test due? New irrigation install requires a backflow preventer? Commercial premise isolation per BC plumbing code? Certified backflow testers on staff.
Install, repair, annual testing, City of Vancouver compliance reports. (778) 961-0824.
Backflow Prevention in Vancouver
Backflow prevention assemblies stop water from flowing backward into the City of Vancouver potable water supply. Required by BC plumbing code for any cross-connection between potable water and a system that could contaminate it – irrigation systems, fire suppression, commercial buildings, restaurants, automotive shops, anything with chemicals tied to the water line.
Three common Vancouver backflow scopes:
Annual testing and certification. BC plumbing code requires annual testing of all installed backflow assemblies. Test must be performed by a certified backflow tester (we have certified testers on staff). Test results submitted to the City of Vancouver Cross-Connection Control program for compliance. $189-$329 per assembly typical.
New backflow installation. Required for new irrigation systems, fire suppression, commercial premises, and renovation projects that add backflow risk. Sizing per BC code, install per manufacturer specs, certification test before activation. $589-$1,989 for residential irrigation backflow, $1,489-$4,989 for commercial premise isolation depending on size.
Repair and replacement. Backflow assemblies fail. Internal check valves wear out, relief valves stick, test cocks corrode. Failed assemblies must be repaired or replaced within 30 days of test failure to maintain compliance. $389-$1,489 typical depending on assembly type.
All Mamba backflow work includes test reports submitted to City of Vancouver Cross-Connection Control program, manufacturer warranty registration, and certificate of work for property records. $5M general liability, full WCB.
Annual Testing & City of Vancouver Compliance
Every installed backflow assembly in Vancouver requires annual testing per BC plumbing code section 7.4 and City of Vancouver Cross-Connection Control bylaw. Property owners receive renewal notices from the City; failure to test results in code violation notices and potential water service interruption.
Our certified backflow testers carry calibrated test kits (Watts TK-99D or equivalent) and submit test reports digitally to the City’s Cross-Connection Control program. Test usually takes 30-45 minutes per assembly. Most properties have 1-3 assemblies (main premise isolation plus irrigation plus any fire suppression).
Test results are pass/fail per BC code. Fails require repair or replacement within 30 days to maintain compliance. We coordinate the re-test after repair at no additional trip charge.
For commercial properties with multiple assemblies, we offer annual contract pricing – all assemblies tested in one visit, single invoice, City reports filed simultaneously. Predictable budget vs. ad-hoc testing.
Most-installed assembly types in Vancouver: Watts 909 Double Check Valve (residential irrigation), Watts 909RPDA Reduced Pressure Detector Assembly (fire suppression), Conbraco / Apollo 4ALF Reduced Pressure Zone (RPZ) for commercial premise isolation, Wilkins 350 / 375 series for various applications.
Annual test pricing: $189-$329 per single assembly, $389-$589 multi-assembly at the same property, $589-$1,489 commercial multi-property portfolio.
New Install & Replacement
BC plumbing code requires backflow prevention at any cross-connection – point where potable water could be contaminated by another source. Common Vancouver triggers for new install:
New irrigation system. Lawn or garden sprinkler systems must have a Double Check Valve Assembly (DCVA) or Pressure Vacuum Breaker (PVB) at the point of connection to the home’s plumbing. $589-$989 typical install including the valve, supply line tie-in, City permit. Activated by certification test before the irrigation system can be used.
Fire suppression system. Commercial fire suppression and residential fire sprinklers require Reduced Pressure Detector Assemblies (RPDA). Sized per the building’s fire flow requirements. $1,989-$4,989 typical install including the RPDA, valve box, City permit.
Commercial premise isolation. New commercial buildings, restaurants, retail spaces, and automotive shops require RPZ at the service entrance. Protects the City water supply from any internal cross-connection risk. $1,489-$3,989 typical for standard commercial sizes (3/4″ to 1.5″).
Automotive shops, dental offices, restaurants. Specific BC code requirements based on use type. We assess your facility and recommend the correct assembly type and size.
Replacement of failed assemblies. Backflow assemblies have a 10-25 year service life depending on type and water conditions. Failed assemblies must be replaced – usually cheaper than rebuilding. We size, install, certify, and submit to City Cross-Connection Control.
All new installs include City of Vancouver permit, manufacturer-spec install, certification test before activation, and certificate of work. Coordination with your irrigation contractor or fire suppression contractor included.
Backflow Prevention Services
Annual Backflow Testing & Certification
Certified testers, calibrated equipment, digital test report submission to City. $189-$329 per assembly. Re-test free after repair.
Irrigation Backflow Install
DCVA or PVB sized for residential or commercial irrigation. $589-$989 install. City permit included.
Commercial Premise Isolation (RPZ)
Reduced Pressure Zone assembly at service entrance for commercial buildings, restaurants, retail. $1,489-$3,989 typical.
Fire Suppression Backflow (RPDA)
Reduced Pressure Detector Assembly for fire suppression systems. $1,989-$4,989 typical.
Backflow Repair
Internal check valve replacement, relief valve service, test cock replacement. $389-$889. Less than replacement for repairable assemblies.
Multi-Site Portfolio Testing
Property management companies with 3+ sites. Tiered annual pricing. Single invoice, coordinated City reporting.
Why Vancouver Properties Choose Mamba for Backflow
Certified Testers on Staff
BC requires certified backflow testers for compliance testing. We have certified testers on staff – no subbing to third party, faster scheduling.
Digital City Reporting
Test reports submitted digitally to City of Vancouver Cross-Connection Control program. Faster compliance turnaround vs. paper reports.
Repair or Replace Honest Advice
Failed assemblies sometimes can be repaired ($389-$889), sometimes need replacement ($589-$4,989). We tell you which side of the line your assembly is on – in writing, before any work starts.
Multi-Site Portfolio Discounts
Property management companies with 3+ buildings get tiered annual contract pricing. Single dispatch contact, coordinated City reporting, predictable budget. 86 reviews, 4.9 stars.
Vancouver Backflow Prevention Prices
Annual test single assembly: $189-$329.
Annual test multi-assembly same property: $389-$589.
Re-test after repair: Free if Mamba did the repair.
Irrigation backflow install (DCVA / PVB): $589-$989.
RPDA install (fire suppression): $1,989-$4,989.
RPZ install (commercial premise isolation): $1,489-$3,989.
Backflow repair (single assembly): $389-$889.
Backflow replacement (single assembly): $589-$1,489 standard, $1,989-$4,989 commercial.
Multi-site portfolio annual contract: Custom quote, tiered pricing.
City permit + Cross-Connection Control submission: Included in install.
Annual backflow test due? New install needed? Stay compliant with the City of Vancouver Cross-Connection Control program.
9 Backflow Prevention Tips for Vancouver Property Owners
- Test annually – it’s required. BC plumbing code section 7.4 and City of Vancouver bylaw require annual testing of installed backflow assemblies. Non-compliance leads to violation notices and water-service risk.
- Schedule the test before the City renewal deadline. City sends renewal notices. Schedule the test 30 days before the deadline to allow time for repair if needed.
- Don’t ignore a failed test. Failed assemblies must be repaired or replaced within 30 days. After that, the City can escalate to violations and water-service interruption.
- Install backflow when you add irrigation. New irrigation system without backflow is a code violation. BC plumbing code requires DCVA or PVB at the irrigation tie-in point.
- Commercial premise isolation is non-negotiable. Restaurants, automotive shops, dental offices, retail with chemicals tied to water – RPZ at the service entrance is required.
- Get the City Cross-Connection Control report. Documentation of compliance. Useful at building sale, insurance audit, and any water-quality inquiry.
- Sometimes repair beats replacement. Single failed internal component (check valve, relief valve, test cock) can often be repaired at $389-$889 vs. $589-$1,489 replacement. We diagnose first.
- Multi-site portfolios get tiered annual pricing. Property management companies with 3+ buildings on annual contracts get lower per-site rates. Worth consolidating with one provider for the discount.
- Plan backflow in renovation rough-in. If your renovation adds cross-connection risk (irrigation expansion, new appliance with chemicals), include backflow in the rough-in. Cheaper than retrofitting.
Frequently Asked Questions
Annually. BC plumbing code section 7.4 and City of Vancouver Cross-Connection Control bylaw require annual testing of all installed backflow assemblies.
$189-$329 per single assembly. $389-$589 multi-assembly at the same property. Re-test free after repair if Mamba did the repair.
Yes – we have BC-certified backflow testers on staff. Calibrated test equipment (Watts TK-99D). Digital test report submission to City of Vancouver Cross-Connection Control program.
Failed assemblies must be repaired or replaced within 30 days to maintain compliance. We diagnose – sometimes a $389-$889 repair restores compliance, sometimes the assembly needs replacement.
Yes – BC plumbing code requires DCVA or PVB at the irrigation tie-in point. Install $589-$989 typical, certification test before activation.
BC plumbing code requires RPZ at commercial service entrances. Specific requirements based on use type (restaurant, automotive, retail with chemicals).
Yes – we submit digital test reports to City of Vancouver Cross-Connection Control program. Faster compliance turnaround vs. paper reports. Certificate of compliance emailed to you.
Yes – 3+ buildings get tiered annual contract pricing. Single invoice, coordinated City reporting, single dispatch contact.
Yes – non-compliance with City Cross-Connection Control program can affect homeowner insurance coverage. Some BC insurers offer minor discounts for documented annual compliance.
THE UTMOST QUALITY AND PROFESSIONALISM, 24/7
QUALITY IS OUR GAME
Mamba Drainage strives to deliver excellence one client at a time by upholding our core values throughout our services. We believe honest and meaningful work creates and sustains the foundation for exceptional client relations.